To process designs for a certain machine, you need to adjust the settings of the machine with the correct quality and creel.

  1. In Plant view (section MONITORING), search and select the machine you want to adjust and click the Edit button at the bottom to change the settings.
  2. Open the Quality and production tab.
  3. In the Possible qualities box, click Edit to select the possible qualities that can be used on the machine. A filter is automatically applied on the number of frames.

  4. Select the qualities that can be used on the machine and click Choose.
  5. In the Possible creels box, click Edit to select the possible creels that can be used on the machine. A filter is automatically applied on the number of frames.


  6. Select the creels that can be used on the machine and click Choose.
  7. Save the changes by clicking the Save button at the bottom.


Now you can make a production order with the possible qualities and creel you have added to the machine quality.


Active quality and creel is fully tracked by Connect and cannot be changed when machine communication is available and production is controlled through Connect. When creating production orders, Connect will always select the last used quality/creel combination so that you don't have to manually enter it every time.